Diagonal cut out

  • 6
  • Idea
  • Updated 6 months ago
Several times over the last few days I have had a situation where I needed to do a cutout, but due to the nature of the image it needed to be a diagonal cutout (the angle varied from image to image.)

The only way I could do it was

1. Rotate the image using a custom angle until the area to be cut out was vertical or horizontal
2. Do the cutout
3. Lasso and move the section that is now misaligned
4. Rotate the image back to horizontal (an almost impossible task given the current rotation mechanism)

What I would prefer to do is:

1. Use the polygon selection tool to mark out the cutout on the original image (no rotation)
2. Select the cutout tool and apply it.
 
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes

Posted 6 months ago

  • 6
Photo of davidlambert

davidlambert

  • 257 Posts
  • 81 Reply Likes
Using the polygon selection tool and copying doesn't work, I take it.
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
Not slickly no.  it's a PITA
Photo of Dubie

Dubie

  • 1515 Posts
  • 1250 Reply Likes
Paul,

I'm onboard with this idea. Vote cast.

In the mean time why don't you make a cutout image (greenscreen green) or two?
You can put it on a image/capture, remove the green  **Boom** a cutout.

It's easy to do and you can angle it any way you want and you will also have a few options such as no pre-shadow applied to the edge but you can add one or adjust the width of the cutout easier.

Just a thought.

If you want to know a couple of ways to create a cutout image and how to use it let me know.

Dubie:)
(Edited)
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
Right, I think I got that, but how'd you close the gap?  I cut out both to remove irrelevant content AND to save screen real estate.
Photo of Joe Morgan

Joe Morgan

  • 7602 Posts
  • 4152 Reply Likes
How about a screen shot? I think diagonal cut out is self explanatory. But to what end?
Closed gap, what the heck are you removing at an angle?
2 or 3 screen shots maybe?
(Edited)
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
Your wish is my vague suggestion:

(Edited)
Photo of Rick Stone

Rick Stone

  • 5953 Posts
  • 2838 Reply Likes
Hi Paul

When you first rotate the image, note the number of degrees. Then when you need to rotate it back, subtract that number from 360. Shouldn't that give you the precision you need?

Cheers... Rick :)
Photo of Joe Morgan

Joe Morgan

  • 7602 Posts
  • 4152 Reply Likes
Yeah, the effect is somewhat complex  with the jagged edge, shadow, and all things considered.
Creating the effect manually would be a lot of work. I think rotating the image and using the built cut out tool. Un-rotating the image, manually selecting one side of the cutout image.Then moving it closer to the other to fill the gap "To Taste". Will probably be faster than any workarounds.

I've voted for the idea.

You could created scripted actions in Photoshop to streamline the process. But SnagIt's no Photoshop, and it would still require a lot of manipulation to get there in Photoshop. SnagIt's faster.
The Jagged edge cutout is no walk in the park effect to reproduce.

Regards.,Joe 
Photo of Dubie

Dubie

  • 1515 Posts
  • 1250 Reply Likes
Here is a vid with a method to do angled cutouts.

The work is in making the cutouts which isn't difficult but once made them you can use them over and over.

In the video when I add a shadow to my created cutout BEFORE I save it is optional but I think helps to define the edges a bit better.

The video is the basics, refine the process to your needs of course.

https://www.screencast.com/t/UuJXf8BLGNa


Dubie:)

Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
One man's meat is another man's poison.

See, I've been doing it my way and I can tell you that for this tired old hack, remembering to capture the original rotation number while I try to find the angle I want visually, is tough.  It'd be easier if you could enter minus numbers for counterclockwise, but -45 degrees requires the less obvious +315.
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
Where do you hail from Dubie?  I was trying to figure out your accent.  I'm thinking somewhere around New England.
Photo of Paul

Paul

  • 1644 Posts
  • 1227 Reply Likes
Rick, you've reminded me of a story about my late MIL.  As a young child she believed God's name was Harold!  When her teacher asked how she came to that idea she said,  "Well miss, the Lord's Prayer starts 'Our Father, Who art in Heaven, Harold be thy name!'"
Photo of Rick Stone

Rick Stone

  • 5953 Posts
  • 2838 Reply Likes
Well, growing up, I thought my name was Jesus Christ.

My father would always scream out: Jesus Christ! What did you do NOW?
Photo of Dubie

Dubie

  • 1515 Posts
  • 1250 Reply Likes
@ Paul

The accent is my radio voice.  LOL

Michigan, US is where I call home.