New upgrade "Camtasia 2018" - why fee required???

  • 2
  • Question
  • Updated 1 month ago

Why is the new upgrade "Camtasia 2018" fee required?

This spring our company bought the new version "9" after we used "Camtasia Studio 8" for several years.
Now a new version is available yet again - "Camtasia 2018".
It's not a good customer service that we should pay for this upgrade again!


Best regards,
Klaus

Photo of klaus.weser

klaus.weser

  • 1 Post
  • 0 Reply Likes

Posted 5 months ago

  • 2
Photo of Mal Reynolds

Mal Reynolds

  • 373 Posts
  • 244 Reply Likes
It's not "required". There's nothing actually wrong with Camtasia 9 - yeah, OK, there are a lot of things wrong with Camtasia 9 including the audio features or lack thereof, the absence of keyboard shortcuts, the absence of any form of automation - but Camtasia 9 is a perfectly functional piece of software, and it will continue to be supported for a while yet based on TechSmith's life cycle.
Camtasia 2018 has several new features which may or may not be of interest to you. If they are, you can pay for the upgrade. If they're not, you still have the software that you paid for.
Photo of Naomi Skarzinski

Naomi Skarzinski

  • 202 Posts
  • 189 Reply Likes
Wanted to clarify, there are plenty of keyboard shortcuts in Camtasia 9. I use them all the time.  Here's a small sample of the most commonly used keyboard shortcuts.

Photo of Naomi Skarzinski

Naomi Skarzinski

  • 202 Posts
  • 189 Reply Likes
Okay.  :-)  This was a short list of keyboard shortcuts.  There are more.  It sounds like you would be better off with a different piece of software.  I was simply one user trying to help another user.
Photo of Mal Reynolds

Mal Reynolds

  • 372 Posts
  • 244 Reply Likes
Well that's a deliciously condescending remark there, Naomi. Which "other user" were you trying to help there? Was it me, because you know, it's not like I've been using the software for over half a decade and am pretty sure that I know about the keyboard shortcuts that exist. In fact, you joined this forum in 2016, while I've been here since 2012 so I'm pretty sure that I do know my way around the software by now, certainly as well as you do.

But yes, I'll take your "love it or leave it" advice to move to a different piece of software under advisement.
(Edited)
Photo of Naomi Skarzinski

Naomi Skarzinski

  • 202 Posts
  • 189 Reply Likes
Oh my gosh. So sorry for having tried to help. My apologies. I did not mean to offend.
Photo of Jenm

Jenm

  • 43 Posts
  • 23 Reply Likes
Thank you naomi, you helped me. I appreciate your frequent constructive assistance and am happy that you are part of this community.
Photo of Mal Reynolds

Mal Reynolds

  • 372 Posts
  • 244 Reply Likes
That's OK, but the UI issues have been a bugbear of mine for ages now. No software is perfect, but the mindset behind the UI design in Camtasia is something that I just can't get my head around because it's almost as if the designers never need to use the thing in real life. Camtasia is a lot easier to use than some products but when I tally up the amount of time wasted, and wasted for no reason than that the devs won't budge on something that is so obvious, it becomes mildly infuriating.

An example of this is what they did with Silence. In earlier versions it was available in the GUI but not as a keyboard shortcut. Then they introduced a keyboard shortcut (Shift + S) but removed it from the GUI. Why, WHY would anyone think to do that? A well designed GUI offers multiple paths to the same thing with maximum discoverability. At least it's been reintroduced to the context menu in 2018, and the keyboard shortcut has been retained. (Edit: It's actually in 9.1 too; I may be misremembering the version but I know it vanished from the GUI at one point after Shift + S was introduced.)


But the absence of customisability is just ridiculous. For example, I often, and I mean often, have to speed up a clip. To do it is a 7 step process:
  • - Split one end;
  • - Split the other end;
  • - Select both audio and video tracks;
  • - Right click and select Apply Clip Speed;
  • - Go to the Properties and set the speed to 10* (or whatever)
  • - Select the resulting gap;
  • -Ripple delete.

The fact that I can't do a simultaneous split on both ends of the selection isn't just the absence of a keyboard short, that feature doesn't exist at all. But at least if I had the option of assigning a quick key to "Apply {my definition} clip speed}" it would at least take out steps 4 and 5. Yes, it's 4 or 5 seconds. But with the videos I produce I need to do this no less than 15 times per week. 

Similarly, and again this is more than a shortcut issue, if the person who designed the Clip Speed feature thought about how the feature would be used in real life, how could it not occur to them that:
  • - If someone shortened the clip, there would be a need to drag content to the right back; and
  • - If they lengthened the clip, there would be a need to push the content to the right along to make room.

In neither case do we have a "One click" solution to do this.
Annotations is another thing. I make a minimum of 3 videos per week, each one will normally have a minimum of, say, 6 overlays of various types. While I have the most common ones grouped in folders in my library I still have to switch across from the panel that I'm on (whether that be the Media Bin, Transitions or whatever) to the library. Now I grant you that "B" used to move you to what was the Media Bin / Library tab, but now that they are on separate tabs they seem to have overlooked a key to move to the Library. (The help page still shows B as being a toggle between the Clip Bin and the Library, but it isn't; it takes you to the clip bin only.) And even then, you have to open the right folder and extract the asset. (Which is why I don't think that nested folders in 2018 will work that well in practice. I understand and agree with the thinking behind them, but I want the minimum distance between me and my assets, which means that I'll still have them in the first level folders. I might use nested ones for archives, though.)


Imagine how much time would be saved if we had the option of being able to assign our own keyboard shortcuts to our most commonly used assets so that we could just {type}, and bang, there it is at the playhead. Yes, on one or two assets, it's not much time. But it adds up, and up, and up.
And these are just f'rinstances.

How the Camtasia designers don't get this is a source of ongoing irritation.
(Edited)
Photo of mgarcia4

mgarcia4

  • 3 Posts
  • 1 Reply Like
Yah, I just bought Camtasia back in April 2018 and I tried to run it for the first time last weekend and I was immediately asked to renew. RENEW? WTF? I just bought it. Camtasia is becoming another ADOBE kind of company that extracts every penny out of you. So, are we talking about $99 in renewals every year? Just say it's $9 a month if you want the latest. I don't see Camtasia as a one-time payment kind of thing...

Photo of Jenm

Jenm

  • 43 Posts
  • 23 Reply Likes
Please refer to Mal Reynolds very good explanation, which is the top reply. Also, I think if you purchased your copy less than 6 months ago your upgrade should be about $50, not $99. 
Photo of mgarcia4

mgarcia4

  • 3 Posts
  • 1 Reply Like
I bought my license on February 1st, 2018. Back in July it was a $99 renewal and I refused to renew. Last weekend I checked again to see if I missed some discount and no, it was $99. 
Photo of adamshut

adamshut

  • 1 Post
  • 0 Reply Likes
I am still thinking it's wrong to charge for upgrades. Yes, it was $99 and i see $130 there now.
It is wrong. Even Adobe bought back his customers licenses by converting them to the subscription when they went cloud-based.
So what now ? pay to upgrade now and get ready to pay to upgrade next year again ?

Photo of kayakman

kayakman, Champion

  • 6251 Posts
  • 1835 Reply Likes
as with many things in life, you have to pay to play

with subscriptions, you pay every month

with major upgrades to a new "version", you pay on a much longer cycle [1 to 3 years for most software products]

paid upgrades can be good because you can opt-out and keep on playing

with subscriptions, you have to keep on paying; no pay usually = no more play
Photo of mgarcia4

mgarcia4

  • 3 Posts
  • 1 Reply Like
I already bought Cyberlink PowerDirector. It's more powerful than Camtasia and a lot cheaper. Camtasia is not even a premium product. 
Photo of Rick Stone

Rick Stone

  • 4459 Posts
  • 1987 Reply Likes
Curious how well Cyberlink allows you to record screen activity?
Photo of Mal Reynolds

Mal Reynolds

  • 372 Posts
  • 243 Reply Likes
It's a feature that seems to be distinctly de-emphasised on their web site, but on one of their training videos it all seems very, VERY familiar:
https://www.youtube.com/watch?v=l5C0L_k_wK4

That's a video from 2015 and this may have changed, but it's interesting that the maximum recording rate there was 30fps, which is also very familiar.

However there is at least one point where it's a lot weaker than Camtasia and it's one that matters a lot to me with my workflow; instead of bringing in separate tracks for the system audio and the narration audio the way Camtasia does, Power Director just has a slider button that allows you to adjust the relative volumes. For mine that's a serious "fail" because I need to run my voice channel through Audacity to improve the quality but those changes CANNOT be applied to the system audio as well without screwing it up.